XRL handelsmerk insetsellager met eksentrieke kraag SA
Inleiding
Twee tipes laers met eksentrieke huls is UEL-tipe met wye binnering en UEL-tipe met plat einde van binnering.
Toepassing
Laer met eksentrieke huls is geskik vir situasies waar die rotasierigting nie verander word nie.
Grense:
| Bearing | Skag | Dia. | Afmetings (in.) of (mm) | Basies Dinamies | Basies Staties | Gewig | |||||||||||
| Geen. | d | ||||||||||||||||
| (in.) | (mm) | Be | D | B1 | n | m | Bi | K | H | G | h | ds | Laai gradering (kg) | Laai gradering (kg) | (kg) | ||
| SA | 201 | 12 | 0,4724 | 1,5748 | 0,7520 | 0,2362 | 0,5157 | 1,1260 | 1,1250 | 0,5315 | 0,1968 | 0,1417 | 1/4-28UNF | 960 | 480 | 0,13 | |
| 201-8 | 1/2 | 12 | 40 | 19.1 | 6.0 | 13.1 | 28.6 | 28.6 | 13.5 | 5.0 | 3.6 | M6X1.0 | |||||
| SA | 202 | 15 | 0,4724 | 1,5748 | 0,7520 | 0,2362 | 0,5157 | 1,1260 | 1,1250 | 0,5315 | 0,1968 | 0,1417 | 1/4-28UNF | 960 | 480 | 0,13 | |
| 202-10 | 5/8 | 12 | 40 | 19.1 | 6.0 | 13.1 | 28.6 | 28.6 | 13.5 | 5.0 | 3.6 | M6X1.0 | |||||
| SA | 203 | 17 | 0,4724 | 1,5748 | 0,7520 | 0,2362 | 0,5157 | 1,1260 | 1,1250 | 0,5315 | 0,1968 | 0,1417 | 1/4-28UNF | 960 | 480 | 0,13 | |
| 203-11 | 11/16 | 12 | 40 | 19.1 | 6.0 | 13.1 | 28.6 | 28.6 | 13.5 | 5.0 | 3.6 | M6X1.0 | |||||
| SA | 204-12 | 3/4 | 0,5512 | 1,8504 | 0,8465 | 0,2756 | 0,5708 | 1,2205 | 1,3110 | 0,5315 | 0,1968 | 0,1575 | 1/4-28UNF | 1000 | 630 | 0,17 | |
| 204 | 20 | 14 | 47 | 21.5 | 7.0 | 14.5 | 31,0 | 33.3 | 13.5 | 5.0 | 4 | M6X1.0 | |||||
| SA | 205-14 | 7/8 | 0,5906 | 2,0472 | 0,8465 | 0,2953 | 0,5511 | 1,2205 | 1,5000 | 0,5315 | 0,1968 | 0,1693 | 1/4-28UNF | ||||
| 205 | 25 | 15 | 52 | 21.5 | 7.5 | 14 | 31,0 | 38.1 | 13.5 | 5.0 | 4.3 | M6X1.0 | 1100 | 710 | 0.2 | ||
| 205-16 | 1 | ||||||||||||||||
| SA | 206-18 | 1 1/8 | |||||||||||||||
| 206 | 30 | 0,6299 | 2,4409 | 0,9370 | 0,3150 | 0,6220 | 1,4055 | 1,7520 | 0,6260 | 0,2362 | 0,1969 | 5/16-24UNF | 1520 | 1020 | 0,31 | ||
| 206-19 | 1 3/16 | 16 | 62 | 23.8 | 8.0 | 15.8 | 35.7 | 44,5 | 15.9 | 6.0 | 5 | M8X1.0 | |||||
| 206-20 | 1 1/4 | ||||||||||||||||
| SA | 207-20 | 1 1/4 | |||||||||||||||
| 207-22 | 1 3/8 | 0,6693 | 2,8346 | 1 0000 | 0,3346 | 0,6653 | 1,5315 | 2,1890 | 0,6890 | 0,2559 | 0,2244 | 5/16-24UNF | 2010 | 1390 | 0,46 | ||
| 207 | 35 | 17 | 72 | 25.4 | 8.5 | 16.9 | 38,9 | 55,6 | 17.5 | 6.5 | 5.7 | M8X1.0 | |||||
| 207-23 | 1 7/16 | ||||||||||||||||
| SA | 208-24 | 1 1/2 | 0,7087 | 3,1496 | 1,1890 | 0,3543 | 0,8346 | 1,7205 | 2,3740 | 0,7205 | 0,2559 | 0,2441 | 5/16-24UNF | ||||
| 208-25 | 1 9/16 | 18 | 80 | 30.2 | 9,0 | 21.2 | 43,7 | 60,3 | 18.3 | 6.5 | 6.2 | M8X1.0 | 2560 | 1810 | 0,61 | ||
| 208 | 40 | ||||||||||||||||
| SA | 209-26 | 1 5/8 | |||||||||||||||
| 209-27 | 1 11/16 | 0,7480 | 3,1496 | 1,1890 | 0,3740 | 0,7559 | 1,7165 | 2,5000 | 0,7205 | 0,2559 | 0,2677 | 5/16-24UNF | 3300 | 2100 | 0,65 | ||
| 209 | 45 | 19 | 85 | 30.2 | 9.5 | 19.2 | 43,6 | 63,5 | 18.3 | 6.5 | 6.8 | M8X1.0 | |||||
| 209-28 | 1 3/4 | ||||||||||||||||
| SA | 210-30 | 1 7/8 | 0,7874 | 3,1496 | 1,1890 | 3,3937 | 0,7559 | 1,7165 | 2,7520 | 0,7205 | 0,2559 | 0,2559 | 5/16-24UNF | ||||
| 210-31 | 1 15/16 | 20 | 90 | 30.2 | 10 | 19.2 | 43,6 | 69,9 | 18.3 | 6.5 | 6.5 | M8X1.0 | 3500 | 2300 | 0,83 | ||
| 210 | 50 | ||||||||||||||||
| SA | 211-32 | 2 | |||||||||||||||
| 211-34 | 2 1/8 | 0,9449 | 3,1496 | 1,2756 | 0,4724 | 0,8032 | 1,9055 | 3,0000 | 0,8150 | 0,3150 | 0,2835 | 3/8-24UNF | 4400 | 3000 | 0,87 | ||
| 211 | 55 | 24 | 100 | 32.4 | 12 | 20.4 | 48,4 | 76,2 | 20.7 | 8 | 7.2 | M10X1.0 | |||||
| 211-35 | 2 3/16 | ||||||||||||||||
| SA | 212-36 | 2 1/4 | |||||||||||||||
| 212 | 60 | 0,9449 | 4,3307 | 1,3150 | 0,4724 | 0,8426 | 2,0905 | 3,3150 | 0,8780 | 0,3150 | 0,3150 | 3/8-24UNF | 4850 | 2960 | 1.3 | ||
| 212-38 | 2 3/8 | 24 | 110 | 33.4 | 12 | 21.4 | 53,1 | 84,2 | 22.3 | 8 | 8 | M10X1.0 | |||||
| 212-39 | 2 7/16 | ||||||||||||||||
